Wall Starter Kits: Joining New Brick or Blockwork to Existing Walls
A wall starter kit connects new brick or blockwork to an existing masonry wall where this type of connection is specified. Before buying, check the existing wall, the new wall layout and the kit contents. The profiles, ties and wall fixings work together as a system.
Our stainless steel wall starter kit is sold as a 2.4m kit, with two separate 1165mm profiles, movable ties and a wall fixing pack. Choose a pack of 1, 5 or 10 complete kits.
How does a wall starter kit work?
The starter profiles fix vertically to the existing masonry. Ties connect to those profiles and are built into the mortar joints of the new wall. This provides a connection between the old wall and the new masonry along the junction.
Channel-and-tie systems are one alternative to the traditional method of toothing new brickwork into an existing wall. The correct detail depends on the wall construction and project design; the kit does not determine the rest of the wall’s support, damp-proofing or movement requirements.
What is included in our stainless steel wall starter kit?
| Component | Supplied per kit |
|---|---|
| Stainless steel starter profiles | Two profiles, each 1165mm long |
| Twist-and-slide wall ties | 10 ties |
| Coach screws | Five, with wall plugs and washers |

The movable ties allow their positions to suit the masonry courses during installation. Use the specified tie spacing, embedment and fixing arrangement for the system and wall detail.
Does “2.4m wall starter kit” mean a single 2.4m strip?
No. Our listing contains two 1165mm profiles designed to be joined or overlapped. The 2.4m description is the kit’s marketed size; it is not the measured length of either individual profile.
Check the installation detail for the required overlap, fixing positions and finished connection height. Do not calculate coverage by treating the pack as one continuous 2.4m length. This is particularly useful to check when comparing kits from different ranges, as their profile lengths and joining details can differ.
Choosing a wall starter kit for blocks or bricks
Start with the actual masonry units and the planned junction. Brick courses and block courses put mortar beds at different heights, so the tie arrangement must work with the new masonry.
Check the existing wall material and condition as well as the new wall thickness, junction height and fixing locations. A kit described for brick or blockwork still needs to match the specified connection. “Universal” in a product name does not mean it suits every wall or fixing substrate.
Are wall fixings included?
Yes. Each of our kits includes coach screws, plugs and washers alongside the profiles and ties. Check that the supplied fixing system suits the existing masonry and the connection specification before starting.
Use the installation instructions for drill size, hole preparation, fixing positions and tightening. Requirements from another manufacturer’s guide may relate to a different plug, profile or substrate.
How many wall starter kits should you order?
Count the complete connection arrangements required by the project detail, then choose the pack quantity. Check each planned wall junction and masonry leaf rather than assuming one set of profiles covers every part of a cavity-wall connection.
- Pack of 1: one complete kit containing two profiles.
- Pack of 5: five complete kits.
- Pack of 10: ten complete kits.
The pack number counts complete kits, rather than individual profiles or loose ties. The listed contents above apply to each kit.
What should you check for an external wall junction?
Use the project detail for the cavity, damp-proofing, weather seal and any required movement provision. The metal connector is one part of that junction. Confirm these details before installing the profiles or building the new masonry.
If the junction or wall construction differs from the intended system detail, resolve that before ordering additional fixings or substituting ties.
Wall starter kit or crack stitching bars?
These products serve different jobs. A wall starter connects new masonry to an existing wall. Helical crack stitching bars are used within specified masonry repairs across cracks. If you are repairing existing brickwork, our crack stitching bar buying guide explains the bar sizes and pack contents.
Ready to choose your kit?
Check the connection detail, confirm the included components and select the number of complete kits required. Shop stainless steel wall starter kits or browse our builders metalwork collection for related connection hardware.
For help finding a listed pack or product, call Fixings Direct on 01278 551288.